Regular maintenance of horizontal double-suction pumps
Release time:
2024-01-10 16:16
Source:
Horizontal double-suction pump _ how to do a good job of regular maintenance of the pump?
First, the purpose of pump maintenance.
Ensure that the pump running status or standby status is always good.
Second, the pump maintenance program.
1. Check the stuffing box
Pumps using packing box seal, be sure to pay attention to the tightness of the packing, too loose leakage is too much impact on performance, in normal times, the leakage should be about sixty drops per minute, drip for normal, drip too much for abnormal.
2. Check the mechanical seal
Mechanical seal dripping water is not exposed, such as found in the pump seal out of the phenomenon of dripping, please replace the mechanical seal.
3.Lubricate the bearings
Check whether the oil is discolored, there are impurities, such as should be replaced as soon as possible. If you find the bearing sound abnormal, need to replace the bearing
4.Check the oil tank
Check whether the oil tank is lack of oil, if lack of oil to add to the appropriate position.
5.Check impeller cleaning
Water pump impeller inflow of foreign matter, need to check and clean, keep the impeller impeller smooth. If the impeller is worn out, it will affect the flow and head efficiency, and need to replace the impeller.
6. Check the wearing parts
Regular inspection of wearing parts, even if the replacement, so as not to affect the efficiency of the pump.
7. Coupling bolts and rubber gaskets should be replaced if damaged.
8. Tighten the machine screws and do rust treatment.
Third, the maintenance of the motor
1, the appearance of the inspection should be clean, intact nameplate, grounding wire is well connected.
2, remove the motor junction box wire connection piece, with 500V megohm meter test motor winding phase and phase, relative to the ground insulation resistance value should not be less than 0.5 megohm.
3, motor junction box three-phase wires and connecting pieces should be firm and tight.
Recommended news
Multi-stage centrifugal pump failure maintenance
balance plate and balance plate with improper clearance, shaft and impeller, impeller mouth ring and guide wing anti-friction ring with excessive clearance (caused by different centers);; ③ impeller damage (caused by different centers); ③ impeller damage (caused by different centers); ③ impeller damage (caused by different centers).
Difference between submersible pumps and sump pumps
Currently on the market there is a practical sewage pump, that is, non-clogging sewage pumps, then this kind of sewage pump really does not appear clogging situation? In fact, if you are normal operation, and the choice of the manufacturer of the product is generally speaking will not appear clogging, of course, want to make it work freely, but also need to carry out maintenance and maintenance.
Northern winter water pump anti-freezing, thawing measures
Recently, some of the motor companies half-yearly report and performance forecast shows good. CLP motor company in the first half of 2018 the company realized operating income of 2014216000 yuan, an increase of 48.06 compared with the same period of the previous year
Regular maintenance of horizontal double-suction pumps
Horizontal double-suction pump _ how to do a good job of regular maintenance of the pump?
Self-priming pumps have no suction causes and processing methods
If the pipeline leakage can be tested or negative pressure test, if the hose can be installed at both ends of the pipe boring and in the middle of the pumping pipe to install a 3-way connecting the ball valve and the vacuum table
Centrifugal pump selection and application of some misunderstandings
filter clearance is too large, impurities in crude oil clogging pump impeller suction port.
SAF Coolest v1.2 设置面板 BITSX-AQDX-QSAQE-AXQ
No data prompt
Sorry, there is currently no content in the current column!
You can view other columns or return to Home
SVG图标库请自行添加图标，用div包起来，并命名使用
Copyright © 2023 ZHEJIANG DAMING MECHANICAL&ELECTRICAL CO.,LTD. All Rights Reserved
